Features:
Use: adjustable angle drill bit, cross or other accessories on milling machine, planer, grinding machine and cutter will become workpieces, after fastening workpieces, such as machining inclined plane, inclined drill, etc.
Usage: (1) loosen the screw, pull the V-shaped block along the base of the guide wheel rotation to find the target angle. Using the cursor reading principle, the main scale is 1 ?? at the index and the cursor index is 10 '. The line "0" on the cursor is aligned with the line "0" on the major scale to indicate that the measurement plane a is parallel to the reference plane and the reference plane B is perpendicular to the reference plane.
1.When the "0" line of the cursor is on the right side of the "0" line of the main scale, use the line of the cursor "0" to read the degree, and use the scale on the right side of the scale to read the fraction. The cursor "0" (reading the same as the vernier caliper) rotates counterclockwise with respect to a, B measuring surface degree (??), minute (').
2.When the "0" line of the cursor is on the left side of the main scale "0" line, use the cursor "0" to read the degree, and use the left scale of the cursor "0" to read the fraction. Read slope (??), point (')
A, B measure the rotation angle clockwise.
3.After adjusting the angle to the target value, adjust block V to the reference position.
Main technical indicators:
(1) when the measuring plane a is parallel to the bottom and the measuring plane B is perpendicular to the plane datum plane, the "0" line of the cursor does not match the "0" line of the main scale. In addition, the curvature of both ends of the cursor and the coincidence degree of the main scale shall not be greater than 5 '; on the other hand, tighten the screw to align the main scale line 0 ?? with the "0" light scale line, and the parallelism between the measurement surface a and the reference plane shall not be greater than 0.01mm, and the parallelism between the measurement surface B and the vertical plane shall not be greater than 0.01mm.
(2) in the fixed state, the indication error of adjustable angle gauge shall not exceed 10 '
Specifications:
Material: steel, surface hardened at HRC58-62 ??, nickel plated.
Size:?
AP25: 75x36x25mm/2.95x1.42x0.98"?
AP30: 102x49x30mm/4.02x1.93x1.18"?
AP46: 102x49x46mm/4.02x1.93x1.81"
Color: Silver
Angle precision in readable nonius 10
Fine adjustment range with SCR stop is 0 ?? to 60 ??
Use: in milling machine, planer, adjustable angle grinder and regular blade drilling machine, cross with other accessories or fix workpiece after parts processing, such as processing slope, inclined hole drilling, etc.
Nickel plating, oxide parallelism and vertical precision grinding of each working face are 0.01mm.
It can be a cursor indicating the angle of continuous tilt adjustment, and then fixed with screws. It is used to create various fixed angle machining, workpiece testing.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
?
Use: adjustable angle drill bit, cross or other accessories on milling machine, planer, grinding machine and cutter will become workpieces, after fastening workpieces, such as machining inclined plane, inclined drill, etc.
Usage: (1) loosen the screw, pull the V-shaped block along the base of the guide wheel rotation to find the target angle. Using the cursor reading principle, the main scale is 1 ?? at the index and the cursor index is 10 '. The line "0" on the cursor is aligned with the line "0" on the major scale to indicate that the measurement plane a is parallel to the reference plane and the reference plane B is perpendicular to the reference plane.
1.When the "0" line of the cursor is on the right side of the "0" line of the main scale, use the line of the cursor "0" to read the degree, and use the scale on the right side of the scale to read the fraction. The cursor "0" (reading the same as the vernier caliper) rotates counterclockwise with respect to a, B measuring surface degree (??), minute (').
2.When the "0" line of the cursor is on the left side of the main scale "0" line, use the cursor "0" to read the degree, and use the left scale of the cursor "0" to read the fraction. Read slope (??), point (')
A, B measure the rotation angle clockwise.
3.After adjusting the angle to the target value, adjust block V to the reference position.
Main technical indicators:
(1) when the measuring plane a is parallel to the bottom and the measuring plane B is perpendicular to the plane datum plane, the "0" line of the cursor does not match the "0" line of the main scale. In addition, the curvature of both ends of the cursor and the coincidence degree of the main scale shall not be greater than 5 '; on the other hand, tighten the screw to align the main scale line 0 ?? with the "0" light scale line, and the parallelism between the measurement surface a and the reference plane shall not be greater than 0.01mm, and the parallelism between the measurement surface B and the vertical plane shall not be greater than 0.01mm.
(2) in the fixed state, the indication error of adjustable angle gauge shall not exceed 10 '
Specifications:
Material: steel, surface hardened at HRC58-62 ??, nickel plated.
Size:?
AP25: 75x36x25mm/2.95x1.42x0.98"?
AP30: 102x49x30mm/4.02x1.93x1.18"?
AP46: 102x49x46mm/4.02x1.93x1.81"
Color: Silver
Angle precision in readable nonius 10
Fine adjustment range with SCR stop is 0 ?? to 60 ??
Use: in milling machine, planer, adjustable angle grinder and regular blade drilling machine, cross with other accessories or fix workpiece after parts processing, such as processing slope, inclined hole drilling, etc.
Nickel plating, oxide parallelism and vertical precision grinding of each working face are 0.01mm.
It can be a cursor indicating the angle of continuous tilt adjustment, and then fixed with screws. It is used to create various fixed angle machining, workpiece testing.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3cm measuring deviation due to manual measurement.
?
1 X?Milling Setup Angle Plate?
          
 Drop Shipping Service. 1.There is no limited stock to fulfill the orders on a daily basis. 1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO) 2. Orders processed timely after the payment verification.3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 4. The images shown are not the actual item and are for your reference only. 5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season. 6. If you have not received your order after 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction! 7. Delivery : ?    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.
It is impossible to address issues if we do not know about them! |
You May Also Like
Don't Like These？