?
400W AC 220V Motor Speed Controller Pinpoint Regulator Controller Forward and Backward
Product Description:
The Speed Controller has 6 wires, the black wire is the main line of the motor, the red and white are the capacitance auxiliary lines, and the two blue lines are the speed feedback lines. The green line is the ground wire.
Widely used in packaging, printing, food, electronics, instrumentation, medical equipment, clothing industry production line as speed drive device.
Specifications:
Parameters:
Working power supply: AC220V 50/60HZ, voltage fluctuation range is positive or negative 10%Ue;
Rated power: 400W
The use of the environment temperature: -10~+50??
Relative humidity: less than 90%.
Usage method:
1. Turn off the power supply, connect to the wiring diagram and confirm that the connection is correct and do not modify it arbitrarily.
2. Fixed the controller well and set the speed to the lowest "0" so as to avoid the instantaneous high current and permanent damage when starting the power supply.
3. Then turn on the power supply, adjust the speed knob to the desired position, and turn off the power when it is not needed.
4. Adjust the fine-tuning potentiometer (speed setting adjustment) on the side of the product if the connection between the governor and the motor fails to meet the requirements of the rotation distance or speed.
5. In order to change the direction of motor operation, only the jumper of CCW and CW on the connection seat on the back of the controller is replaced.
Select COM and CW short, then the motor rotates clockwise.
Select COM and CCW short, then the motor rotates counterclockwise.
6. The action switch only controls the motor to operate or stop, and does not interrupt the power supply. If it is not used for a long time, please turn off the power supply.
When changing direction, the motor must be stopped after the motor is completely stopped.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow slight measuring deviation due to manual measurement.
?
Product Description:
The Speed Controller has 6 wires, the black wire is the main line of the motor, the red and white are the capacitance auxiliary lines, and the two blue lines are the speed feedback lines. The green line is the ground wire.
Widely used in packaging, printing, food, electronics, instrumentation, medical equipment, clothing industry production line as speed drive device.
Specifications:
Parameters:
Working power supply: AC220V 50/60HZ, voltage fluctuation range is positive or negative 10%Ue;
Rated power: 400W
The use of the environment temperature: -10~+50??
Relative humidity: less than 90%.
Speed range: 90-1400r/min 50HZ, 90-1700r/min 60HZ
Dimension:10*8*5cm/3.94*3.15*1.97"
Usage method:
1. Turn off the power supply, connect to the wiring diagram and confirm that the connection is correct and do not modify it arbitrarily.
2. Fixed the controller well and set the speed to the lowest "0" so as to avoid the instantaneous high current and permanent damage when starting the power supply.
3. Then turn on the power supply, adjust the speed knob to the desired position, and turn off the power when it is not needed.
4. Adjust the fine-tuning potentiometer (speed setting adjustment) on the side of the product if the connection between the governor and the motor fails to meet the requirements of the rotation distance or speed.
5. In order to change the direction of motor operation, only the jumper of CCW and CW on the connection seat on the back of the controller is replaced.
Select COM and CW short, then the motor rotates clockwise.
Select COM and CCW short, then the motor rotates counterclockwise.
6. The action switch only controls the motor to operate or stop, and does not interrupt the power supply. If it is not used for a long time, please turn off the power supply.
When changing direction, the motor must be stopped after the motor is completely stopped.
Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow slight measuring deviation due to manual measurement.
?
1 X?Motor Speed Controller?
|
?
?
      
?
?
  ? Drop Shipping Service. 1.There is no limited stock to fulfill the orders on a daily basis. ? 1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO) 2. Orders processed timely after the payment verification.3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 4. The images shown are not the actual item and are for your reference only. 5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season. 6. If you have not received your order after 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction! 7. Delivery : ?  
?
 We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.
It is impossible to address issues if we do not know about them! |
?
?
You May Also Like
Don't Like These？