Description:
N1201SA series is a portable RF vector impedance measurement analyzer, which is easy to use and easy to operate. Built in high capacity lithium-ion battery, suitable for mobile and outdoor use.
The shutdown automatically saves the setting parameters without manual intervention. After the startup, the interface settings are exactly the same as before the power-off, which is very easy to use.
It can be used to test the impedance of antenna and RF equipment.
Because RF impedance measurement needs to be calibrated, you need to purchase calibration separately.
Specifications:
Working currency: 140mhz ~2700mhz
Actual currency: 137.5-2700mhz
Step frequency: 1kHz
Display: 2.4 "TFT trdp
Resolution: 320 x 240 (QVGA)
Battery capacity: 2000mAh (7.4wh)
Power consumption: < 1.5W
Charging current: 400mA
Charging port: USB
Automatic power off can be set to 5-60 minutes.
Measurement parameters: resistance, reactance, standing wave, S11
Resolution: 4
Frequency accuracy: About 5ppm
Connector: sma-k
Material: ABS + electronic components
Size: 15cm * 10cm * 3.5cm/5.91*3.94*1.38"
Measurement range:
Impedance: 0.1-1000
Standing wave: 1.000-65
S11(dB):0dB~60dB
Working temperature: 0 ~ 40 ??
Atmospheric pressure: 860hpa-1060hpa
The instrument has four interfaces: single point measurement, scanning, system information, calibration and calibration.
The default guide is to enter the single point measurement interface.
Note:?
For the convenience of the user, the calibration option for each calibration will be automatically changed to user calibration. At the same time, in order to ensure the integrity of the calibration, during the calibration process, the automatic shutdown function will fail and the guidance will be consistent.
Startup and shutdown:
Press and hold the CTRL key to turn off, and then press the power switch button.
In the start-up state, press and hold the switch button (more than 2S) for a long time. After releasing, the instrument will turn off.
In the start-up state, press and hold the switch button (more than 2S) for a long time. After releasing, the instrument will turn off.
Recommended use:
1. To ensure the accuracy of measurement and calibration, please preheat the instrument for at least 15 minutes.
2. Try to use high-quality RF cable and connector.
3. Calibration cables marked with the next mark may not need to be calibrated and used directly.
4. The process of testing the cable will affect the measurement accuracy. It is recommended not to select too long testing cable when possible.
5. Before measurement and calibration, please make sure you are not in the strong wireless signal to avoid interference due to inaccurate measurement.
6. If the impedance measurement itself is not understood, you can refer to the instructions and tutorials of vector network analyzer. The instrument is equivalent to single port vector network analysis.
Notes:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3cm measuring deviation due to manual measurement.
?
N1201SA series is a portable RF vector impedance measurement analyzer, which is easy to use and easy to operate. Built in high capacity lithium-ion battery, suitable for mobile and outdoor use.
The shutdown automatically saves the setting parameters without manual intervention. After the startup, the interface settings are exactly the same as before the power-off, which is very easy to use.
It can be used to test the impedance of antenna and RF equipment.
Because RF impedance measurement needs to be calibrated, you need to purchase calibration separately.
Specifications:
Working currency: 140mhz ~2700mhz
Actual currency: 137.5-2700mhz
Step frequency: 1kHz
Display: 2.4 "TFT trdp
Resolution: 320 x 240 (QVGA)
Battery capacity: 2000mAh (7.4wh)
Power consumption: < 1.5W
Charging current: 400mA
Charging port: USB
Automatic power off can be set to 5-60 minutes.
Measurement parameters: resistance, reactance, standing wave, S11
Resolution: 4
Frequency accuracy: About 5ppm
Connector: sma-k
Material: ABS + electronic components
Size: 15cm * 10cm * 3.5cm/5.91*3.94*1.38"
Measurement range:
Impedance: 0.1-1000
Standing wave: 1.000-65
S11(dB):0dB~60dB
Working temperature: 0 ~ 40 ??
Atmospheric pressure: 860hpa-1060hpa
The instrument has four interfaces: single point measurement, scanning, system information, calibration and calibration.
The default guide is to enter the single point measurement interface.
Note:?
For the convenience of the user, the calibration option for each calibration will be automatically changed to user calibration. At the same time, in order to ensure the integrity of the calibration, during the calibration process, the automatic shutdown function will fail and the guidance will be consistent.
Startup and shutdown:
Press and hold the CTRL key to turn off, and then press the power switch button.
In the start-up state, press and hold the switch button (more than 2S) for a long time. After releasing, the instrument will turn off.
In the start-up state, press and hold the switch button (more than 2S) for a long time. After releasing, the instrument will turn off.
Recommended use:
1. To ensure the accuracy of measurement and calibration, please preheat the instrument for at least 15 minutes.
2. Try to use high-quality RF cable and connector.
3. Calibration cables marked with the next mark may not need to be calibrated and used directly.
4. The process of testing the cable will affect the measurement accuracy. It is recommended not to select too long testing cable when possible.
5. Before measurement and calibration, please make sure you are not in the strong wireless signal to avoid interference due to inaccurate measurement.
6. If the impedance measurement itself is not understood, you can refer to the instructions and tutorials of vector network analyzer. The instrument is equivalent to single port vector network analysis.
Notes:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3cm measuring deviation due to manual measurement.
?
1 X N1201SA ANT SWR Antenna Analyzer?
        
 Drop Shipping Service. 1.There is no limited stock to fulfill the orders on a daily basis. 1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO) 2. Orders processed timely after the payment verification.3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address. 4. The images shown are not the actual item and are for your reference only. 5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season. 6. If you have not received your order after 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction! 7. Delivery : ?    We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.
It is impossible to address issues if we do not know about them! |
You May Also Like
Don't Like These？