Motos Motorcycle Handlebar Three-level Intelligent Heated Grips Electric Heating Warmer Handle for Scooters Motorcycle Grips
Bullet Points:
1??Longer Service Life: The integrated molding to prevent rain and dust from entering the internal corrosion parts for longer and safer service life.2??Three-level Temperature Adjustment: Built-in intelligent temperature control chip, the handlebar has three-level temperature adjustment. The intelligent temperature control is more secure.
3??Universal Use: The 12V voltage handle with about 22mm diameter is suitable for most motorcycles.
4??Wider Installation Range: With the double throttle line buckle, the heated handlebar has a wider installation range.
5??Beautiful and Convenient: The sealed and opening design does not affect the handlebar outside and the decorative accessories such as lights for more beautiful and convenient.
Descriptions:
Operation Instructions:
Power on: The red light, blue light, green light flashes once after each turn off
Standby: The red light is breathing and flashing, the temperature reaches the highest level and the blue light is automatically turned off after 2 hours.
Working status: The indicator light is always on (high-level: the red light is always on, mid-level: the blue light is always on, low-level, the green light is always on).
Long press the button for 3 seconds: enter standby mode or shut down.
Click on the key: switch gear.
How to use the switch:
Press and hold for 3 seconds to turn on, the red breathing light will light up, and it will automatically turn blue when a certain temperature is reached. Press once to change the temperature of the blue light to medium temperature. Presses twice to turn green and the temperature is the lowest. Press it three times for red with third level high temperature. Press and hold for 3 seconds to shut down and turn off automatically after 2 hours of standby. You do not have to worry about false power consumption.
Installation instructions:
1. Remove the original handlebar.
2. The left hand moisturizes the inner hole with soap and water, and the twisting range should not be too large during installation.
3. When installing the balance iron in the left hand, adjust the position of the balance iron to be slightly separated from the handle, and do not squeeze the handle when tightening the screws.
4. The red power wire is connected to positive pole and the black wire is connected to negative pole. Please confirm before connecting and do not connect reverse.
5. The left-hand power supply should leave enough power to rotate the wire when installing it.
6. Put the switch L-shaped bracket on the rear-view mirror, fix it to the base of the rear-view mirror and tighten it.
Wiring method:
1. Connect to the electric door lock (behind the key) of the motorcycle. The red wire is connected to the positive output wire of the electric door lock, and the black wire is connected to any negative pole on the car or grounded. Riders who are in standby but can easily forget to turn off the switch.
2. Connect to the positive and negative poles of the battery, red to the positive pole of the battery [+], and black to the negative pole of the battery [-]. Because this electric heater has added the function of automatic shutdown on standby, even if the battery is forgot to turn off the switch, just turn on in standby mode, you do not have to worry about running out of batteries (it is recommended to turn on the standby mode in advance).
Specifications:
Name: Intelligent Thermostat Electric Handle
Model: ZH-983A1
Net Weight: about 277G
Gross weight: about 330G
Material: Nitrile material
Handle length: left handle: about 143 * 36mm/5.75*1.42in; right handle: about 127 * 36mm/5*1.42in
Packing size: about 20x13x6cm/7.87*5.12*2.36in
Color: black
Suitable pipe diameter: about 22mm/0.87in
Input voltage: DC12V
Power: red light 35W, blue light 25W, green light 17W
Handle temperature: Low temperature 40??C, medium temperature 50??C, high temperature 60??C
Handle Type: sealable and passable electric handlebar
Switch type: Multi-level temperature adjustable control switch
Applicable models: 12V motorcycle with a handle diameter of 22mm
Packing List:
Adhesive Rubberx1
Rearview Mirror Fixing Bracketx1
Notes:
1. When installing the left handle, do not twist the handle too much. The excessive twist will cause the heating wire to shift.
2. For models with a balance iron, adjust the installation position of the balance iron. Do not squeeze the handle when tightening the screws. The balance iron is slightly separated from the handle. If the installation position of the balance iron cannot be adjusted, please add a spacer between the balance iron and the handlebar. Excessive squeezing the handlebar will cause difficulty in turning the handlebar switch, and the heating wire will squeeze out the handlebar surface and cause abnormal damage.
3. When wiring, connect red wire to positive pole, black wire to negative pole. If the switch is reversed, the switch will burn out, but the handle will heat up. So please make sure to connect the positive and negative terminals before wiring to prevent burning.
? All items will be shipped within 2 business days after the payment is cleared.? All items will be shipped via Post Mail, which normally takes 15-35 days to arrive.? International shipping requires more complicated shipping procedures (such as both countries customs, transit stations etc.), also will effect by many factors, such as holidays, weather conditions etc, so it will probably take longer time for your items to arrive at the final destination. Thank you for your understanding on this matter.? Import duties, value added taxes and any other charges are not included in the item price or shipping costs.Country Delivery Time(Via Post Airmail)
Payment :
? We accept Paypal, West Union, TT, Bank Transfer , QIWI Wallet, WebMoney , All major credit cards are accepted through secure payment processor Paypal.? Payment must be made within 3 days of order? If you can??t checkout immediately after auction close, please wait for a few minutes and retry Payments must be completed within 3 days.
? Customer feedback is very important to us.? Please leave 1 minute to contact with us BEFORE you leave bad feedback, we will solve the problem positively and do all we can to make you satisfied? if there is any issue with your purchase. We maintain high standards of excellence and strive for 100% customer satisfaction!
Our office hours are :- 9:00 to 18:00 (GMT +8) of Monday to Friday- 8:30 to 12:30 (GMT +8) of SaturdayAnd our office is closed on Sunday and public holidays (China)We apologize for the late reply during the holidaysOur Missions:1. To export high quality goods from the orient at a competitive price to you.2. To work with our customers to build up his business .3. To maximize our international buyer`s profitability and competitiveness.Please come back soon and visit us again!