Easy installation and good water saving performance.
Fine atomizing nozzle, brass body with stainless steel core guide vanes.
The liquid forms a centrifugal vortex in the guide vanes, and fine hollow mist particles are ejected from the orifices.
Can be widely used in plant humidification, cooling, disinfection, dust reduction, landscaping, salt spray test and other artificial fog.
The nozzle hole of the nozzle is punched by the American precision punching machine, the hole diameter is 0.3mm, and the production cost is excellent, and the use cost is save more than 10 times compared with the gas humidification.
This series of nozzles does not require air assistance.
The system device is simple, the spray mist is fine, the atomization is sufficient, the energy saving and water saving, the cost is low, and the effect is good.
The stainless steel spray film is processed by advanced forging process and has strong durability. It is 2.5 times times the life of the same kind of nozzle.
The nozzle can be completely atomized by the pressure of the tap water, and the use of the high-pressure water pump is small and the effect is better.
Packing: OPP bag packaging
Application: Agriculture, lawns, villas, industrial irrigation, green belt watering, dehumidification.
1. It is recommended to install the atomization system at a height of 2.5m-3m/8.2-9.84ft.
2. Connect the adapter to the faucet.
3. Turn on the faucet cleaning system for 1 minute to clean the system and remove impurities.
4. Screw the spray nozzle onto the tee fitting except the one at the end.
5. Turn on the faucet cleaning system for 2 minutes to ensure the system is completely cleaned.
6. Close the water and install the last nozzle onto the fitting and use the end plug.
7. The atomizing pipe is fixed by a cable tie saddle clip provided.
8. Turn on the faucet until the sprayer is working and enjoy the cooling atomization system.
9. When not using the atomization system for a long time, close the nozzle and keep it dry and clean.
1 X 30m/98.42ft 4/7 Hose
1 X Linker
2 X Internal Threaded Faucet Connecters
1 X Puncher
20 X Drippers
15 X Can Close the Dripper Heads
35 X Tees
30 X Double Barbs
15 X Single Barbs
35 X Support Rods
1.Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2.Please allow 1-3cm measuring deviation due to manual measurement.
1set X Irrigation Kit
Drop Shipping Service.
1.There is no limited stock to fulfill the orders on a daily basis.
2.For USA/CA /RU the shipping is quickly.
3.Priority delivery,fast delivery in 48 hours.
4.No invoice or receip or promotional materials included.
1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.
6. If you have not received your order after 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction!
7. Delivery :
We maintain high standards of excellence and strive for 100% customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.
It is impossible to address issues if we do not know about them!