4 Channel 433mHz Wireless Radio Frequency RF Replicator Home Security Remote Control Garage Door Switch

A

4 Channel 433mHz Wireless Radio Frequency RF Replicator Home Security Remote Control Garage Door Switch
Feature:
1. IC original remote controller model 2262 2260 1527 2240, compatible with IC.
2. Vibration resistance and address code need not be considered. The design is compatible with vibration resistance and address code.
3. Not applicable IC is HCS300 31, compatible with scroll code IC.
4. Batteries used in the product range from 12V to 23U. Replace batteries when remote control distance is insufficient.
5. Fixed operating frequency is 315 MHz 433 mhz; other frequencies can be customized.

Specification:
Working frequency: 433 MHz
Powered by 27A 12V batteries

Using Method:
1. Reset before duplication: Duplicate the two keys on the remote control film at the same time until the LED indicates that the reset is successful. After recovery, press the remote control key, the LED will be extinguished.
2. Copy: Place the product correctly before copy. Place the original remote control and copy remote control on the desktop. Press the copy of the remote control with your right hand until the LED is on-off, indicating that it is in the replication state. Press the original remote control key with your left hand. Quickly click on the remote control LED to indicate successful replication. This method is the same as multiple replication keys.
3. Tip: If you reset the remote control code and want to restore, press two keys until the light emitting diode.

Operation Manual:
1. Clear the copy of remote control: Release your hand when you press the button above two keys for a long time and flicker quickly at the same time.
2. Duplication: Press the duplicate remote control button with one hand, press the new remote control button with the other hand and hold it for a few seconds.
3. Usage: If all the above operations are successful, remote control can be used. If it can not be used, please re-operate from the compensation.
4. Recovery: If you encounter misoperation and use useful code, you can press the button under the two keys for 2 seconds at the same time before reproducing, release it when the light flickers fast, and control will be restored.

?

B

433Mhz Universal Wireless Remote Control Switch AC 85V 110V 220V 1CH Relay Receiver RF Module
Specification:
Power input: AC 85V-250 V
Standby Current: <5MA
Radio Frequency: 433Mhz
RF mode of operation: superheterodyne
Acquired sensitivity: > 97 dBm
Transmission distance: 20-50 meters (open space)
Decoding mode: MCU decoding software
Remote Storage: 20pcs
Remote Support Type: Knowed Code 1527
Working mode: instantaneous, alternate
PCB size: 53.8 * 31.2mm

Working mode:
1. Instantaneous: Press the button on the remote control, connect the relay, loosen the button on the remote control, and disconnect the relay.
2. Switchover: Press the remote control button once, the relay turn on, press the remote control button twice, and the relay turn on.
3. Lock: Press UMA remote control button, relay connection, press remote control button B, disconnect relay.

Operation Manual:
1. Clear code: Press the learning button on the receiver eight times and the code will be cleared. After clearing the code, the whole remote control will no longer work.
2. Learning Code: (Instantaneous)
: Once the learning key is pressed (on the receiver), the LED (on the receiver) will flicker once. When the LED is on, press the button on the remote control (you want it to learn), and the LED lamp (on the receiver) will flicker three times and then turn off to learn to succeed.
3. Learning Code: (Substitution): When the learning button is pressed twice (on the receiver), the LED will flicker twice (on the receiver). When the LED is on, press the button on the remote control (you want it to learn), and the LED lamp (on the receiver) will flicker three times and then turn off to learn to succeed.
4. Learning Code: (Lock): Note: When you choose lock mode to learn more about remote control, you need to learn two different buttons. learned "ON" for the first time and "OFF" for the second time.
5. For example: ONE button = ON, button B = OFF. Press the learning button (on the receiver) three times, and the LED (on the receiver) will flicker three times. When the LED is on, press the button on the remote controller (you want it to learn), press the button on the remote controller UM, and the LED indicator flashes three times. Press the button of remote control B, and the flash lights on three times. After 3 seconds, the LED indicator will be turned off and the learning will be successful. A = ON, B = OFF.
Note: If there are more than 25 remote controllers, the system can store up to 25 remote controllers. The receiver will stop working or will not work properly.
?

?

?

1. WORLDWIDE SHIPPING. (Except some countries and APO/FPO)
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.
6. If you have not received your orderafter 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction!
7. Delivery Time: